要实真正的自动化网克,必须注意以下几点:
1.以8139网卡为例.批处理文件要写好.wattcp.cfg文件不要错.
批处理文件(8.2):
分区进行网克:
pgo.bat:
Rtspkt.COM 0x60 -m 100full //加载8139网卡的驱动程序
Set Ghostip=wattcp.cfg
Ghost.exe -clone,mode=prestore,src=@MCmax,dst=1:1 -sure
整盘进行网克批处理命令:
go.bat
Rtspkt.COM 0x60 -m 100full //加载8139网卡的驱动程序
Set Ghostip=wattcp.cfg
Ghost.exe -clone,mode=restore,src=@MCmax,dst=1-sure
wattcp.cfg:
IP=192.168.1.2
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
以上是客户端
下面来说说服务器端.非常关键.要不然,每一台用手动慢慢的输相应的内容.
2.开启DHCP服务器.
3.ghostsrv设置.在这里面设置越简单越好.进行分区网克时,只选中分区就行,其他的不要选,(更多选项的内容不要选),这一点一定要注意.(保证能全自动刻隆)
好了,就提醒这多.
ghost 7.0和ghost7.5的不要DHCP服务器.在进行网克时设置方面要少一些.
要ghost7.5企业版到http://bbs.maxdos.net上的网络克隆专栏中下载.或者QQ:353800788
有什么不明白的直接用QQ联系 本站的QQ群.